Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Ms. Coraline
What can I do for you?
Bending strength means the hardness and softness of filament. Filament with greater anti-bending force has better cleaning effect corresponding to the reaction force, and the filament is more easy to sweep the larger volume of garbage quickly.
Filament with greater anti-bending force has better cleaning effect corresponding to the reaction force, and the filament is more easy to sweep the larger volume of garbage quickly.
It means filament do not break under the certain external force. Breaking resistance rate of filament will directly influence the working efficiency and cost in the tuft process.
Putting one filament on the plane with a hole at the lower end, and that filament is rapidly impacted vertically downward with a fixed force right above the hole. That test procedures can simulate the process of fixing the folded filament in the hole with a rivet by external force. The test procedures can check whether the filament is broken under the impact force. Please see the following picture:
Filament with greater breaking resistance performance is not easy to break under the specific condition in the tuft process, which improves the yield and the use effect of the finished products.
Plastic will occur fatigue failure when it is subjected to repeated or periodic load. The failure form is the attenuation of mechanical properties, which will cause cracks and finally lead to the complete structural damage. The fatigue life of plastic is defined as the numbers of stress actions required to destroy the samples under the action of stress level. The lower the stress level, the longer the fatigue life.
A. Fixing the filament on the machine and setting up data of load force values and friction times.
B. Operating the machine. Under the load conditions, filament rotates and rubs repeatedly in the machine to simulate the working state of filament in the sweeping process.
C. After test, observing the degree of wear of Brush Filament.
The stronger anti-fatigue strength, the lower the wear rate of the filament. In the long-time high-speed frictional cleaning work, filament is not easy to deform and fall off, which can reduce the frequency of replacing the sweeping brush.
The importance of hotel hygiene is not to be said. So, pay attention to a new broom: easy to do a good job in hotel hygiene, the broom surface is still clean! People who are always hygienic should...
How much is the ordinary broom? The broom is a cleaning tool that every family has to prepare. Do you know that the world’s first broom was invented by the Chinese? After a long period of...
How often do you wash your makeup brush? Do you have the habit of cleaning makeup brushes? In fact, many people still don't realize that makeup tools need to be cleaned regularly, otherwise they will...
Roller brush is a professional tool commonly used in decoration and decoration. The material is mostly engineering plastics and fibers, and natural wool fabric is also used. The roller brush is a...
Email to this supplier
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.